Product Description
Stuart Turner Jet 55-45 B – Centrifugal Jet Boostamatic Pump
Ideal for the high pressure delivery of clean non-potable water from a water tank/cistern in either a positive or negative head application. Jet Boostamatic pumps provide fully automatic pressure/flow switch control and are supplied with a power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose, pumping cold water.
KEY FEATURES
- Centrifugal jet pump
- Flow rates up to 55 litres per minute and heads up to 45 metres
- Automatic pressure and flow switch control
- Continuously rated
- Self priming up to 5 metres (footvalve fitted)
- 1 year guarantee
Technical Specification
General | |
Product code | 46619 |
Guarantee | 1 year |
Features | |
Pump type | Centrifugal |
Mechanical seal | EPDM / Carbon / Ceramic |
Fully automatic control | |
Built in ‘no water’ cut out | |
Positive and negative head application | |
Quiet operation | |
Performance | |
Maximum head (closed valve) | 4.5 bar |
Performance @ 10 l/min | 3.1 bar |
Performance @ 40 l/min | 1.2 bar |
Maximum flow | 53 l/min |
Minimum static inlet pressure | 0.1 bar (1 metre) |
Maximum static inlet pressure | 0.5 bar (5 metres) |
Maximum static outlet pressure | 1.3 bar (13 metres) |
Maximum working pressure* | 500 kPa (5 bar) |
Maximum ambient air temperature | 40 °C |
Min / Max water temperature | Min 4 °C / Max 35 °C |
Maximum suction lift | 5 metres |
Cut out flow | 1 l/min (approx) |
Cut in pressure | 180 kPa (1.8 bar) |
Pressure vessel air pre-charge | 2.0 bar (29 psi) |
Connections | |
Pump connections | G 1 female |
Motor | |
Type | Induction, auto-reset thermal trip |
Duty rating | Continuous (S1) |
Electrical | |
Power supply/phase/frequency | 230 V a.c./ 1 / 50 Hz |
Current (full load) | 2.9 Amps |
Power consumption | 640 Watts |
Fuse rating | 13 Amps |
Power cable (pre-wired) | 1.5 metres |
Physical | |
Enclosure protection | IPX4 |
Length | 341 mm |
Width | 207 mm |
Height (excluding hoses) | 327 mm |
Weight (including fittings) | 9.8 Kg |
* The maximum pressure that can be applied to the pump under any installation conditions.
Pump Variants | |
Part no | Description |
46619 | JET 55-45 B, 230/1/50 EPDM/CAR/CER |
46620 | JET 80-45 B, 230/1/50 EPDM/CAR/CER |